易发彩票

联系我们

联系我们

地址:山东省济南市槐荫区经十路28922号乐梦公寓3号楼1701

电话:0531-59825626

手机:18769786220

手机:13355353311

联系人:位经理

网址:

外墙保温装饰一体板应如何做好密封防水
来源: 日期:2018-09-19 发布人:admin

外墙保温装饰一体板应如何做好密封防水

How to do well sealing and waterproof for exterior wall thermal insulation and decoration integral board

1、运用专用的东西整理切割缝两侧的飞边、毛刺及溢出的胶粘剂、依照设计要求填塞分隔缝;

1. Use special things to arrange the flying edges, burrs and overflowing adhesives on both sides of the cutting seam, and fill the partition seams according to the design requirements.

2、运用泡沫塑料或聚苯乙烯做保温棒的时分,其直径或宽度应该是缝宽的1.3倍,填入的厚度保温层厚度相同;

2. When foamed plastic or polystyrene is used as insulation rod, its diameter or width should be 1.3 times the width of the seam, and the thickness of the insulation layer filled with the same thickness.

3、关于切割缝密封及防水处理的时分,深度应该为峰宽的50%左右;

A1级防火保温材料

3. For cutting seam sealing and waterproofing treatment, the depth should be about 50% of the peak width.

4、排气孔宜设置在切割缝处,待密封胶施工结束24小时之后,在板缝中间或十字交叉处安设,排气孔依照每15㎡设置1个钻;

4. Exhaust holes should be set at the cutting seam. After 24 hours of sealant construction, one drill should be set at the middle of the seam or at the cross. Exhaust holes should be set at every 15 feet.

5、同排气栓相匹配的孔,在孔内和排气栓的四周涂好密封胶后,将排气栓嵌入孔中,要求排气孔朝下,防止进水,气孔不能阻塞,装置排气栓的时候,分开贴必须要结实没有渗漏,接近顶部或外墙装置大号有排气栓。

5. With the exhaust plug matching hole, in the hole and around the exhaust plug coated with sealant, the exhaust plug will be embedded in the hole, the exhaust hole face down, to prevent water intake, air holes can not block, device exhaust plug, separate paste must be solid without leakage, close to the top or wall device large exhaust plug.


上一篇:如何合理选择建筑保温材料?
下一篇:防火保温板具有火焰传播性其难燃等级高

 
在线咨询
全国咨询热线
18769786220
友情链接:快赢彩票  新利彩票  吉利彩票官网  新利彩票  新利彩票官网  新利彩票  旺旺彩票  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!